• KeyCreator: Creating Cross Curves to Modify a Surface

    Updated: 2010-06-30 16:10:33
    In this month's Tips and Tricks we’re going to look at an easy way to quickly construct a cross curve that will be used to modify an existing surface.

  • 100 AutoCAD Tips from CAD Notes

    Updated: 2010-06-30 12:21:22
    A while back Edwin, of CAD Notes blog, contacted me regarding a post he was compiling. He had the ambitious target of gathering 100 AutoCAD tips from his own and other blogs into one reference. If you’ve ever written a...

  • Service Pack 1 for 2008 Civil Products Released The CAD Geek Blog

    Updated: 2010-06-30 07:34:46
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog Civil 3D Service Pack 1 for 2008 Civil Products Released Service Pack 1 for 2008 Civil Products Released By Donnie Gladfelter on July 27, 2007 After much anticipation , all of the civil service packs have been released . Note there are two different service packs for Land Desktop and Civil 3D Land Desktop Companion . AutoCAD Civil 3D 2008 Service Pack Issues Resolved AutoCAD

  • Autodesk discussion group changes – user reaction

    Updated: 2010-06-30 05:36:41
    I will be airing my own views on the Autodesk discussion group changes in a future post. In the meantime, I have collected some reactions from other users. For the record, there has been only a little censorship in this area. Here are some of the comments that made it through unhindered: I’ve given it a fair shake and [...]

  • Linetype of sketch geometry in Autodesk Inventor 2011

    Updated: 2010-06-30 03:13:52
    Sketch geometry behaves differently in a sketch depending on the linetype assigned to it. In a part or assembly file, the sketch linetypes available are Normal, Construction, Centerline, and Reference. In a drawing file, you have access to all the linetypes defined by the Drafting Standard you have selected. Using linetypes in part and [...]

  • Free Picnic Table Plans

    Updated: 2010-06-29 23:10:42
    Useful free picnic table plans, building material lists and construction instructions.

  • Raster Design 2011

    Updated: 2010-06-29 19:00:46
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home Raster Design 2011 Submitted by rkmcswain on Tue , 06 29 2010 13:00 AutoCAD 2011 Civil 3D Raster Design Steve Johnson over at blog nauseam is reporting that Raster Design 2011 appears to be set to ship on July 20, 2010, some four months after AutoCAD 2011 started shipping . The

  • Automated anti-telemarketer script – brilliant!

    Updated: 2010-06-29 06:32:19
    Annoyed by telemarketers? Too polite to abuse them or just hang up? Can’t be bothered wasting their time in person? Then you need AstyCrapper. If you’re using the open-source Asterisk PBX, it will crap on for ages on your behalf. It works by detecting responses from the telemarketer and silence gaps and responding with a [...]

  • B.Sc Animation at Manipal University Bangalore Campus

    Updated: 2010-06-29 05:42:02
    Technological advances have taken animation to a whole new level, that it can no longer be learnt in a short-term 6 month certificate programme. The unique B.Sc Animation programme from Manipal University is the perfect choice to groom you into an industry-ready animation professional. Course Details The 3-year full-time programme is conducted at Manipal University Campus, Bangalore. The curriculum, developed [...]

  • AutoCAD weld symbols

    Updated: 2010-06-29 03:11:08
    AutoCAD weld symbols links to free downloads.

  • Electrical Symbols

    Updated: 2010-06-29 02:59:06
    Electrical symbols that you can easily learn how to understand.

  • CAD Software - AutoCAD

    Updated: 2010-06-29 01:43:10
    Developed by Autodesk, the giant of the CAD software industry, AutoCAD provides all the tools necessary to produce professional cad drawings.

  • 3D Architectural Rendering

    Updated: 2010-06-29 01:15:34
    Looking for a 3D architectural rendering? Check out these 3D photorealistic computer renderings...

  • 3D CAD Block Resources

    Updated: 2010-06-29 00:43:39
    An excellent list of 3D CAD block resources for your use.

  • Free AutoCAD Blocks

    Updated: 2010-06-29 00:22:11
    Before you head over to Autodesk or eBay, why not check the many free AutoCAD blocks resources available on the web.

  • Building Blue Prints

    Updated: 2010-06-28 22:27:57
    Looking for professional industrial or commercial building blue prints? Cadtech Design is here to meet your CAD service needs.

  • Free AutoCAD Linetypes

    Updated: 2010-06-28 22:20:42
    We've taken the leg work out of searching for free AutoCAD linetypes and have provided some great resources here.

  • Do It Yourself Plans

    Updated: 2010-06-28 22:00:02
    An extensive list of do it yourself plans and resources to help get DIY projects started.

  • AutoCAD Free Download

    Updated: 2010-06-28 21:11:11
    Get the latest version of the number one CAD software with an AutoCAD free download.

  • Free Fashion Design Software

    Updated: 2010-06-28 21:06:04
    Download these free fashion design software programs that will help you create clothing, garments and a wide range of accessories.

  • Free Pole Barn Plans

    Updated: 2010-06-28 20:58:36
    Looking for a set of free pole barn plans? Look no further...

  • Raster Design 2011 due out on 20 July?

    Updated: 2010-06-28 11:34:59
    After an interminable delay and a complete absence of information from Autodesk (no, “contact your reseller” doesn’t count, especially when they don’t know anything either), it seems Raster Design 2011 is going to be released on 20 July. If that’s correct, those of you who use, say, image formats not directly supported by AutoCAD (e.g. [...]

  • Direct Manipulation in Inventor 2011

    Updated: 2010-06-28 02:06:16
    Direct Manipulation is a new feature added to Autodesk Inventor 2011. Its an user interface that enables the user to interact and modify a model, while viewing the changes in real time. The resulting interaction is dynamic, visual and predictable. The user focuses on the geometry in an in-canvas display instead of [...]

  • Introduction to the AutoCAD 2009 Action Recorder Video The CAD Geek Blog

    Updated: 2010-06-26 18:24:45
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD 2009 Videos Introduction to the AutoCAD 2009 Action Recorder Video Introduction to the AutoCAD 2009 Action Recorder Video By Donnie Gladfelter on April 7, 2008 Goodness , am I not the worst blogger ever My apologies to all of my loyal readers last week was quite a monumental week . As I have mentioned a few times before , The CAD Geek is something I do in my free time .

  • Signing off to get Married The CAD Geek Blog

    Updated: 2010-06-26 09:51:59
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General Signing off to get Married Signing off to get Married By Donnie Gladfelter on June 19, 2010 Well it seems the time has just about come for me to quite literally unplug” from my electronic world of blogging , tweeting , facebooking , even the all-too-obsessive BlackBerry so I can marry my beautiful fiancé tomorrow well technically today at this point Helen my fiancé and I

  • Save 480 on AutoCAD LT 2011 until July 16, 2010 The CAD Geek Blog

    Updated: 2010-06-26 09:51:52
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Save 480 on AutoCAD LT 2011 until July 16, 2010 Save 480 on AutoCAD LT 2011 until July 16, 2010 By Donnie Gladfelter on May 21, 2010 Catching up on some unread blog posts in Google Reader this morning , I came across a post R.K . McSwain made on his CAD Panacea blog a personal favorite earlier this week titled AutoCAD LT rebate AutoCAD LT 2011 retails for 1,200, but

  • Shapes for Linetypes the Super Simple Way The CAD Geek Blog

    Updated: 2010-06-26 09:51:50
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Shapes for Linetypes the Super Simple Way Shapes for Linetypes the Super Simple Way By Donnie Gladfelter on May 20, 2010 Last week I started a discussion about creating Custom Linetypes the Super Simple Way Today I’m going to continue that discussion by talking about yet another component to creating custom linetypes shapes . As this post will outline , linetypes cannot

  • Signing off to get Married The CAD Geek Blog

    Updated: 2010-06-26 09:51:49
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General Signing off to get Married Signing off to get Married By Donnie Gladfelter on June 19, 2010 Well it seems the time has just about come for me to quite literally unplug” from my electronic world of blogging , tweeting , facebooking , even the all-too-obsessive BlackBerry so I can marry my beautiful fiancé tomorrow well technically today at this point Helen my fiancé and I

  • Which is the Best Injection Molding Software ?

    Updated: 2010-06-26 04:02:53
    Well, there are a plenty of Injection Molding Software available in the Market today, FYI, its like just another clone of AutoCAD but the clones cannot provide solutions just like AutoCAD does. What is Injection Molding ? Injection molding: is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. Material is fed into a heated barrel, [...]

  • 2010 Mid-Continent MicroStation Community Conference

    Updated: 2010-06-25 15:05:24
    News about an upcoming event… Registration for the 2010 Mid-Continent MicroStation Community Conference is now open! Be sure to register soon to qualify for our early registration discount. Register at: http://www.tmcmcmc.org/modules/confreg/ What: 2010 TMCMCMC Mid-Continent MicroStation Community Conference When: August 10th and 11th Where: Overland Park Convention Center Costs: Early Registration: $85/day/person (Early registration ends July 23rd at 5pm!) After 7/23: $95/day/person [...]

  • Auto CAD Jobs - Drafting

    Updated: 2010-06-25 06:23:17
    Do you have what it takes for online drafting Auto CAD jobs?

  • Had to stop and look at the view

    Updated: 2010-06-25 04:42:15
    Auckland City from The Warehouse Store Support Office.

  • Autodesk Factory Design Suites

    Updated: 2010-06-24 22:46:19
    Autodesk Factory Design Suites: Autodesk® Factory Design Suites are a 2D/3D factory layout solution purpose-built to help you make better design decisions and accelerate the factory layout process by creating a digital prototype of your factory. Autodesk Factory Design Suite can help you better design, optimize, and visualize the layout before the equipment is installed and [...]

  • Free CAD Software

    Updated: 2010-06-24 21:03:44
    Free CAD software downloads available for your use.

  • Autodesk Inventor Skill Builders

    Updated: 2010-06-24 17:00:02
    Did you know, Autodesk has an section called Skill Builder What is a Skill Builder ? You might have come across Body Builder that’s just building your body although you might show your muscular skills, but that might not be enough, as you need Skills to build your knowledge, to have your daily [...]

  • DWG Trueview and Design Review 2011 direct download

    Updated: 2010-06-23 19:58:04
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home DWG Trueview and Design Review 2011 direct download Submitted by rkmcswain on Wed , 06 23 2010 13:58 Design Review DWG Trueview If you want to download the complete package containing DWG Trueview 2011 and Design Review 2011, and you don't want to wade through a dozen or so

  • The blog stats test: Are you human? Prove it!

    Updated: 2010-06-22 22:18:00
    The Question: The FeedBurner subscription count on my blog varies between 500-3500/day (?). TypePad and Google tell me several hundred to thousand/day land here via search, direct visits or social media. Stats are nice but wonder how many of those...

  • Autodesk Alias Sketch see the benefits

    Updated: 2010-06-22 14:43:02
    Autodesk Alias Sketch and Alias Sketch for AutoCAD design illustration software Concept Design and Illustration Software Explore design ideation and concepts and produce stunning artwork with Autodesk® Alias® Sketch illustration software. Within the intuitive, creative Alias Sketch environment, professional designers and artists from all industries can use the hybrid paint and vector workflow for design illustration and graphic [...]

  • The Stand Up Meeting – The Reports

    Updated: 2010-06-22 01:01:07
    In the last post I discussed the Stand Up Meeting concept.  Now I want to give you an example report. I mentioned that the four questions each person should answer were: What have you done since the last meeting? What will you do before the next meeting? Do you need anything from anyone before the next meeting to keep [...]

  • The Stand Up Meeting

    Updated: 2010-06-21 16:10:00
    Working collaboratively means boosting communications.  One way to do that is with quick – short meetings. I personally call it a “Stand Up Meeting”.  I have heard it called “The Huddle” or other things. Here are some basic ground rules for the meeting. Meetings start on time. Meeting last 15-20 minutes or less (depending on attendee count) It should be [...]

  • AutoCAD Exchange Ask the Expert Series The CAD Geek Blog

    Updated: 2010-06-20 14:51:15
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General AutoCAD Exchange Ask the Expert Series AutoCAD Exchange Ask the Expert Series By Donnie Gladfelter on July 17, 2009 If you haven’t heard about the AutoCAD Exchange you’re sure missing out on an awesome community designed specifically for users like you . Launched in March of this year , the site is packed with all sorts of resources like tips tricks , videos on how to use

  • Revit User Group Wellington - June Meeting Announcement

    Updated: 2010-06-20 11:17:04
    When: 5.30 - 7.30pm, Wed 23 June 2010 Where: Productspec HQ, 14 Holland St, Wellington What: Batch Renderer for Revit: We'll demo the Revit Batch Renderer, a free utility for rendering multiple views in Revit. We'll be showing what it...

  • Automatically Editing Dimensions in Inventor 2011

    Updated: 2010-06-19 16:42:23
    Dimensions in Sketches can be created and edited in Autodesk Inventor 2011. However, I would like to show you a simple trick on how to edit dimensions when they are created, see the video below number of view: 509

  • Signing off to get Married The CAD Geek Blog

    Updated: 2010-06-19 10:50:43
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General Signing off to get Married Signing off to get Married By Donnie Gladfelter on June 19, 2010 Well it seems the time has just about come for me to quite literally unplug” from my electronic world of blogging , tweeting , facebooking , even the all-too-obsessive BlackBerry so I can marry my beautiful fiancé tomorrow well technically today at this point Helen my fiancé and I

  • Best wishes to The CAD Geek

    Updated: 2010-06-19 01:02:07
    I thought thecadgeek had turned (90º) green and moved to Wellington but it was just Twitter Avatar confusion with Stuff Tech in New Zealand. Donnie is getting married and launching his first book in the near future. Congratulations and Best...

  • About The CAD Geek The CAD Geek Blog

    Updated: 2010-06-18 18:09:47
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home About The CAD Geek About The CAD Geek Donnie Gladfelter is a highly visible and respected thought leader in the CAD community . He is well-known for his CAD Geek blog www.thecadgeek.com as author of the book AutoCAD 2011 and AutoCAD LT 2011 : No Experience Required and is a top-rated speaker at Autodesk University and other industry events . He has worked with the development team at

  • Disclaimer The CAD Geek Blog

    Updated: 2010-06-18 18:09:45
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home About The CAD Geek Disclaimer Disclaimer Everything posted on The CAD Geek is personal opinion , and does not in anyway reflect the views of my company , Autodesk , its affiliates , or any other companies mentioned on this . blog Disclosure From time to time companies and vendors have sent products to The CAD Geek for review , or otherwise helped in my coverage of the CAD . industry

  • Contact Me The CAD Geek Blog

    Updated: 2010-06-18 18:09:45
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home About The CAD Geek Contact Me Contact Me Thank you for visiting The CAD Geek . While I always love hearing from my visitors , please note The CAD Geek is something I do in my free time . As I’m sure you can appreciate , my paying job and just life in general can restrict the amount of time I have to respond to e-mails . While you’re welcome to ask me any question you’d like , support

  • Archive The CAD Geek Blog

    Updated: 2010-06-18 18:09:44
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Archive Archive 2010 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2009 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2008 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2006 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec June 2010 Integrated Communication Why BIM doesn't require Revit Complex Linetypes with Shapes the Super

  • Blog The CAD Geek Blog

    Updated: 2010-06-18 18:09:42
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM software From that question alone , I know the person asking it has a

  • Links The CAD Geek Blog

    Updated: 2010-06-18 18:09:41
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Links Links CAD AUGI AUGI Autodesk User Group International CAD Architect CAD Architect aids Architects , Interior designers and professional building designers in providing them with easy to implement CAD Symbols or Pre-designed details or building . types CAD Forum CADTutor CADTutor delivers the best free tutorials and articles for AutoCAD , 3ds Max and associated applications along

  • AutoCAD No Experience Required The CAD Geek Blog

    Updated: 2010-06-18 18:09:40
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD No Experience Required AutoCAD No Experience Required Fatal error Call to undefined function is_post_type( in home dgladfel public_html thecadgeek blog wp-content themes hybrid navigation-links.php on line 20

  • AutoCAD The CAD Geek Blog

    Updated: 2010-06-18 18:09:39
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD AutoCAD AutoCAD® software lets you design , visualize , and document your ideas clearly and efficiently . Initially released in late 1982, AutoCAD was one of the first CAD programs to run on personal computers , and notably the IBM . PC Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has

  • AutoCAD 2007 The CAD Geek Blog

    Updated: 2010-06-18 18:09:37
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD AutoCAD 2007 AutoCAD 2007 From conceptual design through drafting and detailing , AutoCAD® 2007 software enables you to create and explore ideas like never . before Maximize the Power of Page Setups by Importing By Donnie Gladfelter on April 21, 2010 Continuing the topic of using Named Page Setups started with my last post titled Name That Page Setup and Win Save Money” to

  • AutoCAD 2010 The CAD Geek Blog

    Updated: 2010-06-18 18:09:34
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD AutoCAD 2010 AutoCAD 2010 Maximize the Power of Page Setups by Importing By Donnie Gladfelter on April 21, 2010 Continuing the topic of using Named Page Setups started with my last post titled Name That Page Setup and Win Save Money” to help you more efficiently manage plotting I wanted to take a look at how you might implement their use in the real world . The true

  • AutoCAD 2009 The CAD Geek Blog

    Updated: 2010-06-18 18:09:34
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD AutoCAD 2009 AutoCAD 2009 AutoCAD® software lets you design , visualize , and document your ideas clearly and efficiently . From powerful 3D modeling through robust documentation and visualization tools , AutoCAD software provides the power and flexibility to work more productively from concept through completion . If you haven’t looked at it in a while , now is the time to

  • AutoCAD 2011 The CAD Geek Blog

    Updated: 2010-06-18 18:09:32
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD AutoCAD 2011 AutoCAD 2011 Maximize the Power of Page Setups by Importing By Donnie Gladfelter on April 21, 2010 Continuing the topic of using Named Page Setups started with my last post titled Name That Page Setup and Win Save Money” to help you more efficiently manage plotting I wanted to take a look at how you might implement their use in the real world . The true

  • Autodesk U The CAD Geek Blog

    Updated: 2010-06-18 18:09:31
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Autodesk U Autodesk U Each year , Autodesk University brings together over 9000 Autodesk enthusiasts from around the world to learn , network , and celebrate the power of Autodesk technology and the international AU community . As the largest gathering of Autodesk users , developers and partners , AU creates a unique setting where companies and institutions of all sizes can gain

  • AU 2007 The CAD Geek Blog

    Updated: 2010-06-18 18:09:30
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Autodesk U AU 2007 AU 2007 AU is the world’s largest annual gathering of design professionals , industry experts , and Autodesk executives . The four-day event combines a comprehensive learning environment with a trade show and a mix of business and social activities—all designed to help attendees succeed by learning new skills and building valuable business . relationships November

  • AU 2008 The CAD Geek Blog

    Updated: 2010-06-18 18:09:29
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Autodesk U AU 2008 AU 2008 AU is the world’s largest annual gathering of design professionals , industry experts , and Autodesk executives . The four-day event combines a comprehensive learning environment with a trade show and a mix of business and social activities—all designed to help attendees succeed by learning new skills and building valuable business . relationships December 2

  • AU 2009 The CAD Geek Blog

    Updated: 2010-06-18 18:09:28
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Autodesk U AU 2009 AU 2009 Catch me on Dave Graveline's Into Tomorrow radio show this weekend By Donnie Gladfelter on December 12, 2009 While at Autodesk University last week I had the opportunity to sit down with Dave Graveline , host of the popular technology radio show Into Tomorrow . His 3-hour radio program airs on over 100 AM FM radio stations around the U.S . on SIRIUS XM

  • CAD Management The CAD Geek Blog

    Updated: 2010-06-18 18:09:27
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home CAD Management CAD Management Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM software From that question alone , I know the

  • Civil 3D The CAD Geek Blog

    Updated: 2010-06-18 18:09:26
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Civil 3D Civil 3D AutoCAD® Civil 3D® software intelligently connects design and drafting to help boost your productivity . It lets you deliver higher-quality designs and construction documentation , so you can clearly communicate your design intent and win the next . job Weekly Roundup Civil 3D Edition : Visualization Extension , Storm and Sanitary Analysis , Bridge Modeler By Donnie

  • Civil 3D 2008 The CAD Geek Blog

    Updated: 2010-06-18 18:09:25
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Civil 3D Civil 3D 2008 Civil 3D 2008 Make your move to AutoCAD® Civil 3D® software and help your team complete a wide range of civil engineering projects faster , smarter , and more accurately . By intelligently linking design and production drafting , the industry-proven dynamic model at the core of Civil 3D allows you to evaluate multiple design alternatives quickly , minimize

  • Civil 3D 2009 The CAD Geek Blog

    Updated: 2010-06-18 18:09:24
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Civil 3D Civil 3D 2009 Civil 3D 2009 The Autodesk civil engineering solution , made up of AutoCAD® Civil software and AutoCAD® Civil 3D® software , provides project teams with a comprehensive surveying , design , analysis , and documentation solution to deliver land development , transportation , and environmental projects faster and with improved accuracy . With model-centric

  • DWF The CAD Geek Blog

    Updated: 2010-06-18 18:09:22
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home DWF DWF Design Web Format DWF is a secure file format developed by Autodesk for the efficient distribution and communication of rich design data to anyone who needs to view , review , or print design files . Because DWF files are highly compressed , they are smaller and faster to transmit than design files , without the overhead associated with complex CAD drawings or the management

  • General The CAD Geek Blog

    Updated: 2010-06-18 18:09:21
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home General General The CAD Geek is Seeking Employment One Year Later By Donnie Gladfelter on May 26, 2010 Rather than my typical post latent with tips , tricks , and other technical insights , I thought I’d revisit a post that marked the start of a new chapter in my professional career . Tomorrow marks one year since I , like many others before and after me , was laid off from the firm I

  • Other Software The CAD Geek Blog

    Updated: 2010-06-18 18:09:19
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home General Other Software Other Software Five tools for Easy Screencasting By Donnie Gladfelter on March 15, 2010 You’ve seen great how-to-videos here on The CAD Geek and many other blogs on the net , but how do we create and produce professional quality videos Like most things in the tech world , you’ve got lots of options each ranging in price from free to a few hundred dollars . Which

  • Map 3D The CAD Geek Blog

    Updated: 2010-06-18 18:09:18
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Map 3D Map 3D AutoCAD® Map 3D mapping software is the leading engineering platform for creating and managing spatial data . AutoCAD Map 3D geospatial software bridges CAD and GIS by providing direct access to data and enables the use of AutoCAD® software tools for maintaining a broad variety of design and geospatial . information Georeferenced DWF Files By Donnie Gladfelter on

  • Windows The CAD Geek Blog

    Updated: 2010-06-18 18:09:18
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home General Other Software Windows Windows My First Week With Vista By Donnie Gladfelter on January 24, 2008 Wednesday , January 16, 2008, the day in which I decided to say goodbye to my beloved Windows XP and hello to the monster known as Windows Vista . 160 Be it press releases from numerous government agencies , or the ever entertaining Apple I’m a Mac , I’m a PC ads Vista hasn’t found

  • Videos The CAD Geek Blog

    Updated: 2010-06-18 18:09:17
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Videos Videos Creating Custom Contextual Ribbon Tabs in AutoCAD 2010 By Donnie Gladfelter on December 29, 2009 I certainly hope everyone had a wonderful Christmas , and got to spend some quality time with your family . Thanks to a rather historical snow the Saturday before Christmas , here in Richmond , VA we did still have snow on the ground for Christmas . Aside from the big piles

  • AutoCAD 2009 The CAD Geek Blog

    Updated: 2010-06-18 18:09:16
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Videos AutoCAD 2009 AutoCAD 2009 Customizing the AutoCAD 2009 Ribbon By Donnie Gladfelter on March 26, 2008 Autodesk began shipping many of their 2009 products starting Monday . Among those released is their flagship product , AutoCAD 2009. If you just can’t wait until your subscription shipment makes its way to your doorstep , a fully-functioning 30 day trial can be downloaded from

  • AutoCAD 2010 The CAD Geek Blog

    Updated: 2010-06-18 18:09:14
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Videos AutoCAD 2010 AutoCAD 2010 Creating Custom Contextual Ribbon Tabs in AutoCAD 2010 By Donnie Gladfelter on December 29, 2009 I certainly hope everyone had a wonderful Christmas , and got to spend some quality time with your family . Thanks to a rather historical snow the Saturday before Christmas , here in Richmond , VA we did still have snow on the ground for Christmas . Aside

  • Donnie Gladfelter LinkedIn

    Updated: 2010-06-18 18:09:12
    Donnie Gladfelter Author of the book AutoCAD 2011 : No Experience Required Innovator Trainer AutoCAD Expert Richmond , Virginia Area Contact Donnie Gladfelter Add Donnie Gladfelter to your network Current Board of Directors at AUGI Consultant Trainer at The CAD Geek Consultant at Engineered Efficiency Blogger at The CAD Geek see less . 1 more . Past Design Systems Specialist at Timmons Group CAD Technician Designer at Timmons Group Computer Aided Designer Drafter at HC Yu and Associates 1 more . Education J . Seargent Reynolds Hermitage Technical Center Hermitage High School Recommended 2 people have recommended Donnie Connections 183 connections Industry Civil Engineering Websites My Blog Donnie Gladfelter’s Summary Donnie Gladfelter Richmond , VA is a highly visible and respected thought

  • YouTube thecadgeek's Channel

    Updated: 2010-06-18 18:09:11
    Search Browse TV Shows Upload Create Account Sign In Close Welcome to YouTube Suggested Language we have set your preference to this English UK Suggested Location Filter we have set your preference to this United Kingdom The location filter shows you popular videos from the selected country or region on lists like Most Viewed and in search results.If you would like to change either of these preferences , please use the links in the footer at the bottom of the . page Click OK to accept these settings or click Cancel to set your language preference to English UK and your location filter to Worldwide OK Cancel Welcome to YouTube Suggested Language we have set your preference to this English Suggested Location Filter we have set your preference to this United Kingdom The location filter shows

  • Donnie Gladfelter The CAD Geek Blog

    Updated: 2010-06-18 18:09:07
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog Donnie Gladfelter Donnie Gladfelter Donnie is author of the upcoming book AutoCAD and AutoCAD LT : No Experience Required a columnist for AUGIWorld Magazine , Autodesk University speaker , and member of the AUGI Board of Directors Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t

  • The CAD Geek Blog

    Updated: 2010-06-18 18:09:07
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM software From that question alone , I know the person asking it has a limited knowledge of

  • BIM The CAD Geek Blog

    Updated: 2010-06-18 18:09:05
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home BIM BIM Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM software From that question alone , I know the person asking it has a

  • Communication The CAD Geek Blog

    Updated: 2010-06-18 18:09:04
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Communication Communication Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM software From that question alone , I know the

  • Integrated Communication Why BIM doesn't require Revit The CAD Geek Blog

    Updated: 2010-06-18 18:09:04
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog CAD Management Integrated Communication Why BIM doesn’t require Revit Integrated Communication Why BIM doesn’t require Revit By Donnie Gladfelter on June 12, 2010 Chances are if you’re an AEC professional and haven’t heard about BIM you probably don’t have a pulse . As I continue my job search there’s one question that consistently amuses me do you have any experience with BIM

  • Complex Linetypes with Shapes the Super Simple Way The CAD Geek Blog

    Updated: 2010-06-18 18:09:03
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Complex Linetypes with Shapes the Super Simple Way Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has covered creating a simple dashed linetype and creating shapes for a linetype In this post I’m going to continue the series by exploring how to create a linetype using the shape we

  • Linetypes The CAD Geek Blog

    Updated: 2010-06-18 18:09:02
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Linetypes Linetypes Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has covered creating a simple dashed linetype and creating shapes for a linetype . In this post I’m going to continue the series by exploring how to create a linetype using the shape we created earlier . Although the actual

  • MKLTYPE The CAD Geek Blog

    Updated: 2010-06-18 18:09:01
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home MKLTYPE MKLTYPE Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has covered creating a simple dashed linetype and creating shapes for a linetype . In this post I’m going to continue the series by exploring how to create a linetype using the shape we created earlier . Although the actual linetype

  • Shapes The CAD Geek Blog

    Updated: 2010-06-18 18:09:00
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Shapes Shapes Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has covered creating a simple dashed linetype and creating shapes for a linetype . In this post I’m going to continue the series by exploring how to create a linetype using the shape we created earlier . Although the actual linetype is

  • Complex Linetypes with Shapes the Super Simple Way The CAD Geek Blog

    Updated: 2010-06-18 18:08:59
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Complex Linetypes with Shapes the Super Simple Way Complex Linetypes with Shapes the Super Simple Way By Donnie Gladfelter on June 4, 2010 So far my Linetypes the Super Simple Way” series has covered creating a simple dashed linetype and creating shapes for a linetype In this post I’m going to continue the series by exploring how to create a linetype using the shape we

  • The CAD Geek is Seeking Employment One Year Later The CAD Geek Blog

    Updated: 2010-06-18 18:08:58
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General The CAD Geek is Seeking Employment One Year Later The CAD Geek is Seeking Employment One Year Later By Donnie Gladfelter on May 26, 2010 Download my Resume Rather than my typical post latent with tips , tricks , and other technical insights , I thought I’d revisit a post that marked the start of a new chapter in my professional career . Tomorrow marks one year since I ,

  • Resume The CAD Geek Blog

    Updated: 2010-06-18 18:08:57
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home resume resume The CAD Geek is Seeking Employment One Year Later By Donnie Gladfelter on May 26, 2010 Rather than my typical post latent with tips , tricks , and other technical insights , I thought I’d revisit a post that marked the start of a new chapter in my professional career . Tomorrow marks one year since I , like many others before and after me , was laid off from the firm I

  • The CAD Geek is Seeking Employment One Year Later The CAD Geek Blog

    Updated: 2010-06-18 18:08:56
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog General The CAD Geek is Seeking Employment One Year Later The CAD Geek is Seeking Employment One Year Later By Donnie Gladfelter on May 26, 2010 Download my Resume Rather than my typical post latent with tips , tricks , and other technical insights , I thought I’d revisit a post that marked the start of a new chapter in my professional career . Tomorrow marks one year since I ,

  • Save 480 on AutoCAD LT 2011 until July 16, 2010 The CAD Geek Blog

    Updated: 2010-06-18 18:08:55
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Save 480 on AutoCAD LT 2011 until July 16, 2010 Save 480 on AutoCAD LT 2011 until July 16, 2010 By Donnie Gladfelter on May 21, 2010 Catching up on some unread blog posts in Google Reader this morning , I came across a post R.K . McSwain made on his CAD Panacea blog a personal favorite earlier this week titled AutoCAD LT rebate AutoCAD LT 2011 retails for 1,200, but

  • AutoCAD LT 2011 The CAD Geek Blog

    Updated: 2010-06-18 18:08:54
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home AutoCAD LT 2011 AutoCAD LT 2011 Save 480 on AutoCAD LT 2011 until July 16, 2010 By Donnie Gladfelter on May 21, 2010 Catching up on some unread blog posts in Google Reader this morning , I came across a post R.K . McSwain made on his CAD Panacea blog a personal favorite earlier this week titled AutoCAD LT rebate . AutoCAD LT 2011 retails for 1,200, but Autodesk is running a promotion

  • Save 480 on AutoCAD LT 2011 until July 16, 2010 The CAD Geek Blog

    Updated: 2010-06-18 18:08:54
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Save 480 on AutoCAD LT 2011 until July 16, 2010 Save 480 on AutoCAD LT 2011 until July 16, 2010 By Donnie Gladfelter on May 21, 2010 Catching up on some unread blog posts in Google Reader this morning , I came across a post R.K . McSwain made on his CAD Panacea blog a personal favorite earlier this week titled AutoCAD LT rebate AutoCAD LT 2011 retails for 1,200, but

  • Shapes for Linetypes the Super Simple Way The CAD Geek Blog

    Updated: 2010-06-18 18:08:53
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Shapes for Linetypes the Super Simple Way Shapes for Linetypes the Super Simple Way By Donnie Gladfelter on May 20, 2010 Last week I started a discussion about creating Custom Linetypes the Super Simple Way Today I’m going to continue that discussion by talking about yet another component to creating custom linetypes shapes . As this post will outline , linetypes cannot

  • The CAD Geek Blog Part 2

    Updated: 2010-06-18 18:08:51
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 No Experience Required named as an Autodesk Official Training Guide By Donnie Gladfelter on May 13, 2010 The announcement came late last week , but just in case you missed it Wiley publishing will provide Autodesk Official Training Guides for Autodesk’s 2011 products . Ten titles from Sybex , an Imprint of Wiley , will be exclusively designated as Autodesk Official Training Guides” .

  • Weekly Roundup Civil 3D Edition Visualization Storm and Sanitary Bridge Extensions The CAD Geek Blog

    Updated: 2010-06-18 18:08:34
    : , , Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog Civil 3D Weekly Roundup Civil 3D Edition : Visualization Extension , Storm and Sanitary Analysis , Bridge Modeler Weekly Roundup Civil 3D Edition : Visualization Extension , Storm and Sanitary Analysis , Bridge Modeler By Donnie Gladfelter on April 30, 2010 As mentioned in my last post Weekly Roundup AutoCAD Edition far too many cool things happened this week . In fact , it

  • AutoCAD 2011 No Experience Required named as an Autodesk Official Training Guide The CAD Geek Blog

    Updated: 2010-06-18 18:08:32
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD AutoCAD 2011 No Experience Required named as an Autodesk Official Training Guide AutoCAD 2011 No Experience Required named as an Autodesk Official Training Guide By Donnie Gladfelter on May 13, 2010 The announcement came late last week , but just in case you missed it Wiley publishing will provide Autodesk Official Training Guides for Autodesk’s 2011 products . Ten titles

  • Custom AutoCAD Linetypes the Super Simple Way The CAD Geek Blog

    Updated: 2010-06-18 18:08:31
    Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Custom Linetypes the Super Simple Way Custom Linetypes the Super Simple Way By Donnie Gladfelter on May 12, 2010 Linetypes play an integral role in visually separating certain elements of our designs . Most of the time one of the 40+ linetypes that come with AutoCAD will suffice , but there’s always that perpetual need for one more linetype . While its true linetypes must

  • Weekly Roundup AutoCAD Edition Update 2 Release AUGI Wishlists More The CAD Geek Blog

    Updated: 2010-06-18 18:08:30
    : , , Home About The CAD Geek Contact Me Disclaimer Archive Blog Links AutoCAD No Experience Required The CAD Geek Blog By : Donnie Gladfelter AutoCAD AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 AutoCAD 2010 AutoCAD 2011 Autodesk U AU 2007 AU 2008 AU 2009 CAD Management Civil 3D Civil 3D 2008 Civil 3D 2009 Civil 3D 2010 DWF General Other Software Windows Map 3D Videos AutoCAD 2009 AutoCAD 2010 : Browse Home Blog AutoCAD Weekly Roundup AutoCAD Edition : AutoCAD 2010 Update , AUGI Wishlists , AutoCAD Internet Survey Weekly Roundup AutoCAD Edition : AutoCAD 2010 Update , AUGI Wishlists , AutoCAD Internet Survey By Donnie Gladfelter on April 30, 2010 I don’t typically do Weekly Roundup” posts , but there’s only so many posts one blogger can crank out in one week , and well the number

  • More feedback wanted by Autodesk – Viewports

    Updated: 2010-06-18 07:56:21
    Autodesk is looking for participants to help validate potential future AutoCAD viewport enhancements in online sessions. http://www.surveymonkey.com/s/ViewportStudy As always, I encourage your participation in such feedback mechanisms.

  • Convert meshes while working in Inventor 2011

    Updated: 2010-06-18 01:12:19
    The Inventor 2011 Mesh Enabler is a technology preview that enables Inventor users to work with imported Mesh data. Inventor 2011 can import mesh data from Catia V4 and V5 files including CGR. The Mesh Enabler adds the ability to convert selected mesh features to Base features. The resulting base features can then be used [...]

  • Project File Version in Autodesk Inventor 2011

    Updated: 2010-06-17 17:55:44
    Hi, I wanted to share a piece of information about Autodesk Inventor 2011 . . . Its all about File Versions in projects. Each time you save an Autodesk Inventor file, the previous version of the file is stored in an OldVersions folder under the folder containing the file. You can specify how many versions of each [...]

  • Sample CAD Drawings - AutoCAD Conversion

    Updated: 2010-06-17 04:23:42
    View sample CAD drawings that were manually converted from scan to CAD format.

  • Free Landscape Design Software

    Updated: 2010-06-17 04:16:38
    Find the best free landscape design software to use for your backyard project.

  • The Last Gasp for CAD – Part 3

    Updated: 2010-06-16 01:21:58
    What will make it the last gasp for CAD?  What will be the final nail in the coffin of 2D CAD?  Will there be one final function that will move everyone to 3D? Here are some events, items of functions that could make CAD be gone forever… 1.  We move away from hard copy deliverables.   As long [...]

  • How to disable the ViewCube in AutoCAD

    Updated: 2010-06-16 00:40:08
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home How to disable the ViewCube in AutoCAD Submitted by rkmcswain on Tue , 06 15 2010 18:40 AutoCAD Navvcube ViewCube If you are working mainly in 2D and the ViewCube is getting in your way , you can turn it off by entering NAVVCUBE at the command line and setting it to OFF . This is

  • Allow Exploding Blocks in AutoCAD?

    Updated: 2010-06-15 17:17:16
    Is it possible to copy and explode a block if the block was created with the Allow Exploding box unchecked? Back story: We have a checker/scrubber

  • New Houses Blueprints

    Updated: 2010-06-15 03:54:04
    The new houses blueprints you are searching for may well lie in your mind's eye...

  • The Last Gasp for CAD – Part 2

    Updated: 2010-06-15 01:40:30
    Last Gasp for CAD…  maybe not… Here are some reasons that CAD may not be closing in on end of life. 1.  The developers of CAD software are still making strides in adding tools to the 2D world of CAD.  Each new release brings improvements.  They may seem small to most, but out there somewhere is a [...]

  • Revit User Group Auckland – June 2010 meeting announcement

    Updated: 2010-06-14 02:36:40
    At Jasmax, 2 Marston Street, Parnell, on Wednesday 16th June 2010 5.30pm : Join us from 5.30pm for Drinks and Nibbles ($5 donation-receipts available) 6:00pm : Welcome and Introduction 6:05pm : Presentation: Introduction to some new Revit families provided by...

  • Quick Autodesk news

    Updated: 2010-06-14 01:30:38
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home Quick Autodesk news Submitted by rkmcswain on Mon , 06 14 2010 07:30 AutoCAD LT Autodesk Inventor Object Enablers Solidworks Autodesk , and specifically Kate Morrical Technical Marketing Manager AutoCAD LT above would like your feedback regarding AutoCAD LT and Object Enablers ,

  • The Last Gasp for CAD – What made me think of this?

    Updated: 2010-06-14 01:29:49
    Here is the article that started me thinking about the Last Gasp of CAD.  It was an article in Harvard Business Review and one more in HBR. In the article, Daniel Snow warns of a surge in old technology as new technology threatens to overtake it. It is worth the read.

  • ARES 2D/3D CAD application

    Updated: 2010-06-14 01:22:42
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home ARES 2D 3D CAD application Submitted by rkmcswain on Mon , 06 14 2010 07:22 Ares Graebert ARES is new low-cost 2D and 3D CAD application that is DWG compatible . I reviewed ARES Commander Edition for Cadalyst's Spring 2010 edition You can learn more about ARES and its maker

  • The Last Gasp for CAD

    Updated: 2010-06-14 00:38:12
    Technology transitions usher in new software, but the older technology may exhibit a resurgence or “Last Gasp” before it goes under.  A “Last Gasp” is a valiant attempt to revitalize a technology that appears to be reaching the end of it’s useful life. A recent example of one such technology that might be nearing it’s last [...]

  • Build your own Solidworks Lamborghini

    Updated: 2010-06-11 11:03:59
    I followed a Ferrari 430 along the motorway tonight and got home to find this SolidSmack post about another Italian exotic. The YouTube below shows a Lamborghini being modelled in Solidworks and is the summary of Dan Lavoie’s tutorial enabling...

  • Autodesk discussion group update – what do you think?

    Updated: 2010-06-11 05:00:12
    On 4 June 2010, Autodesk turned off NNTP access to its discussion groups as part of the process of updating its software to use a different engine (the new one is from Lithium – here are its own forums). I am preparing a large post about what I think of the new web interface, but [...]

  • Garage Blue Prints

    Updated: 2010-06-03 23:44:57
    Why do you need a set of clear and accurate garage blue prints for your new garage?

  • Finding an Auto CAD Course

    Updated: 2010-06-03 23:43:16
    What Auto CAD course do you need to find the right job? Will you take CAD classes at an Auto CAD school? Find out what your options are...

  • How to Read Blueprints

    Updated: 2010-06-03 23:39:04
    Learn the basics of how to read blueprints and thier symbol meanings.

  • Free Garage Plans

    Updated: 2010-06-03 23:32:39
    Absolutely free garage plans to help you get started on building a garage.

  • Blueprint Symbols

    Updated: 2010-06-03 23:21:29
    Learn how to read architectural, electrical and plumbing blueprint symbols, for free.

  • Free Trailer Plans

    Updated: 2010-06-03 23:12:31
    We've developed this page of free trailer plans resources to give you a list of sites containing various types of trailer plan sketches, drawings, pictures and "how to's" for do it yourselfers.

  • Shift key not working? Part 2

    Updated: 2010-06-03 18:31:15
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home Shift key not working Part 2 Submitted by rkmcswain on Thu , 06 03 2010 12:31 Raster Design Tips Almost five years ago I ran across an issue where the SHIFT key was not working as expected , specifically when trying to hot grip multiple grips . At the time , I found that Raster

  • AutoCAD Wish List Voting for May 2010

    Updated: 2010-06-02 19:00:53
    Home About Index Polls Archives Recent comments LTU is shutting down after first day of use 4 days 23 hours ago Yes 3 weeks 5 days ago Hi , I also had the same 3 weeks 5 days ago Action Recorder 5 weeks 1 day ago I have to agree that I hate 5 weeks 2 days ago Thank you very very 5 weeks 2 days ago Not sure about Inventor 5 weeks 2 days ago On License : transfer 5 weeks 3 days ago Purge 5 weeks 5 days ago Thanks Matt 5 weeks 5 days ago Navigation Popular content Autodesk Support Call Way too proud of Texas guy Home AutoCAD Wish List Voting for May 2010 Submitted by rkmcswain on Wed , 06 02 2010 13:00 Augi AutoCAD Wish List The May 2010 voting results on the AutoCAD wish list are in . The top 10 are listed at the link above , or click on the image . Numbers 11-75 can be found on the same

Current Feed Items | Previous Months Items

May 2010 | Apr 2010 | Mar 2010 | Feb 2010 | Jan 2010